View LPM-1153BMU813_4597881.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LPM-1153BMU813
LED displays
Full color dot matrix unit
LPM-1153BMU813
The LPM-1153BMU813 is a 24x48 dot matrix display which can be used in a wide range of applications such as video screens, graphic, alphabet, numeric and symbol with no color distribution.
Applications For information boards at stations, bus terminals and airports. For message board For graphic display Features 1) 24x48 dot matrix. Dot size : 2.8 2) Dimensions : 96mmx192mm 3) Built in color adjustment LSI enables full color display with no color distribution. 4) Rohm original Potting lens method make it possible to have High-Contrast & Wide-View (2 1/2=140 degrees)display. 5) Over thousand million Colors at display is available by controlling 1,024 gray scale for each color. 6) 1 / 24 duty dynamic scan method. 7) Brightness adjustment circuit is built-in to adjust the whole panel brightness.
Dimensions (Unit : mm)
Product specification
Part No. Emitting surface size (mm) 96x192 Display Emitting Wavelength color (nm) Red LPM-1153BMU813 Potting lens Green Blue (624) (525) (471) 2.8 4 24x48 5 600 5 6.0 Dot size (mm) Dot pitch (mm) Number of dots (dot) Control lCC1 VDD
(V)
LED VLED
(V) Max. (A)
Max. (mA)
lCC2
Brightness Operating freq. (cd/m2) (MHz) 330 890 180 10
Drive type 1/24 duty (sift resister type) levels clock 1024 gray levels
(Max.) External and Internal gray
1/1
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright (c) 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121 FAX : +81-75-315-0172
Appendix1-Rev2.0

▲Up To Search▲

Price & Availability of LPM-1153BMU813

	To Download LPM-1153BMU813 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .